How To Remove Teflon Tape From Shower Head

Disclaimer: This post may contain affiliate links, meaning nosotros get a small commission if yous brand a purchase through our links, at no price to you lot. For more information, please visit our Disclaimer Page.

The plumber'southward tape, also known every bit the Teflon tape, is ane of the most essential things that every plumber has. As we all know, plumbers constantly come across many problems that involve water and the utilise of the plumber'south record is admittedly needed.

Anyhow, putting the tape on pipe threads is easy and it doesn't require any special cognition or skill. On the other paw, removing the same record is style more than difficult than you lot thought. And so, you'll actually need some guidelines in order to practise so.

And luckily, we are hither to explain to you exactly how to remove plumber's tape. And so, permit's start.

Plumber'south Tape Removal – Step by Step Guide

As you already know, plumber's tape is commonly used on pipe threads in order to preclude leaks. And, the most mutual place to see this tape is on shower heads or shower arms.

Sometimes, you can hands and without whatever complications remove plumber'due south tape with your fingers. Just try to peel the tape off the thread and you lot'll do just fine. Still, in other cases, removing plumber's record will require more than effort.

So, let'southward see what you need to do in order to remove information technology from the piping threads and which tools you need to set up for this job.

Tools required:

• A wire castor
• An old piece of cloth
• An old toothbrush

Now, in one case you get together all the essential equipment, it'southward time to begin with the procedure of removing a plumber'southward tape.

Footstep 1 – Use a wire castor to scrub

The first thing you need to practice is to use a stiff wire brush and remove the top layer of the plumber's tape. Now, for this step, it's quite of import to utilize this castor slowly and gently since you lot don't desire to damage the pipage where the plumber's record was applied.

In that calorie-free, just put the brush over the tape and slowly first to peel off the top layer. Once y'all push the castor a couple of times, the pinnacle layer of plumber's tape will get-go peeling off. Now, just go on at the same pace but loosen the pressure level upwards a niggling bit.

The plumber's tape will get-go to peel off even more than and the top layer of the record will be gone. If there are whatsoever ''leftovers'' of the tape on the residue, you can use your fingers and nails to peel it off.

Footstep 2 – Wrap a wet piece of textile around the thread

The adjacent thing to practise is to use an old piece of textile and wrap around the piping thread where the plumber's tape was applied. Proceed in heed that the cloth needs to be damp, preferably with hot water, so you can remove the residuum from the place where the plumber'southward record was applied.

In one case you wrap the cloth effectually the piping, you need to grab it with your hands and start to twist the rag from left to right similar you are rubbing the piping. This will slowly but surely remove all of the residue from the pipage.

Likewise, don't twist too hard or too fast, yous only need to use slow and gentle moves since the residue won't be removed if you don't rub it properly. The moisture from the rug will loosen the plumber's tape residue and information technology will be easier for you to remove it in one case it's loose.

Side by side, you should accept a dry rag and wipe away all the residue that is loosened from the previous rubbing with the damp rag. Once you exercise that, it'due south time to go to the next footstep.

Step 3 – Use an sometime toothbrush

If the residue is all the same there, you will need a lilliputian bit of help from an old toothbrush. At present, the toothbrush has gentle beard then you lot tin't possibly damage the pipe. There's no demand to put a lot of pressure with the toothbrush since the residue will exist cleaned with but gentle moves.

Therefore, take the toothbrush and rub it slowly confronting the pipe thread where you run into the residue from the plumber's tape. Rub the pipe slowly and gently until you get rid of all nasty residuum build-ups.

Step 4 – Wipe threads with a damp textile

Every bit a finishing touch, you will demand a clean moisture piece of cloth in club to wipe the threads and everything that you just rubbed with a toothbrush. So, take the moisture cloth and slowly first to rub the threads. Do it like you are polishing something and endeavor to make clean every inch where the plumber'due south tape was applied.

Nonetheless, you can also employ some kind of cleaning products for this function, or fifty-fifty lemon juice with hot water, but information technology's non necessary. A simple wet rag will do the job properly and you'll end up with a clean piping thread without any plumber's record residue on information technology.

Step five – Bank check and clean everything

In one case y'all did everything accordingly, it'southward time to clean the pipe with a dry rag and check for whatever cracks. So, take a dry rag and slowly collect all the moist or water that you can detect on the pipe. This style, you are ensuring that the pipe is ready to be used again.

You lot can also use a new layer of plumber's tape on the dry pipe now.

Conclusion: How to Remove Plumber'southward Tape

As we can see, removing a plumber's record is not that difficult at all. All you need is to put a scrap more attempt into it and apply some tools and everything will be just fine.

Keep in mind to use ho-hum and gentle moves one time y'all rub the piping thread with the brush or a toothbrush.

Source: https://amarcoplumbing.com/remove-plumbers-tape/

Share this post